EN
18
CLEANING
Unplug the plug before cleaning, and before
moving the appliance. Do not use strong
chemicals, detergents or solvents. Do not use
abrasive detergents or implements. These
kinds of chemicals can damage the appliance.
1. Empty the appliance.
2. Clean the inside and outside of the
appliance with a damp cloth. A little
vinegar in the water counteracts mould.
3. Take off the lid and clean it.
4. Clean the lid in hot water and a mild
detergent.
5. Wipe all the parts dry.
6. Fit the lid with the seal and rubber edging
for the hinge pointing downwards.
NOTE:
The inside of the appliance must be dry
before it is used, otherwise there is risk of
moulding. Leave the lid open if possible.
• The appliance is intended to be used on a
level surface. Avoid tilting the appliance. If
the appliance has to be tilted, for example
when moving it, stand it upright for 20 to
30 minutes before plugging the plug into
the mains and starting it.
PREPARATIONS
1. Plug the plug into the mains.
2. Press the power switch to the right of the
display to start the appliance.
3. Press the thermostat button to the
left of the display to set the required
temperature. The display flashes when
the setting is made. The thermostat
can be set from 0 to 16°C. The average
temperature in the cooler is shown when
it is in use.
Recommended temperature settings
Beer and soft drinks
4°C
White wine
7.8 - 10°C
Red wine
12.7 - 16°C
Follow the instructions below to obtain the
best results.
1. The first time the appliance is started it
should be run nonstop for 12–18 hours.
2. The contents cool quicker if they are
placed at some distance from each other.
Do not overload the appliance.
MAINTENANCE
TRANSPORT
Save the packaging materials for future use. If
possible, transport the appliance in its original
pack.
