MENU Kroyer-Saetter-Lassen Torso Table Lamp 37, Быстрый старт

Страница: 2 / 5

Congratulations
Congratulations on your new lamp designed by Krøyer-Sætter-Lassen. We hope you will enjoy using this lamp and follow these instructions to ensure correct
installation. These instructions are provided for your safety. It is important that the instructions are read carefully and completely before assembling.
This Assembly Instruction cover below items
Torso Table Lamp 37
Torso Table Lamp 57
Component overview and technical details
1 pc. Torso Table Lamp 37, with unglazed ceramic base, linen shade with PC backing, 1 pc. lamp holder for E14 bulb (included), bronzed brass, touch dimmer (3
steps), 2 m black textile covered PVC cord with plug.
Bulb specification
E14, A++, 4 watt, dimanble (in case own bulb is purchased max 60 Watt)
Color temperature - 2700 K
RA > 90
Lumen - 350 lm
1 pc. Torso Table Lamp 57, with glazed ceramic base, linen shade with PC backing, 1 pc. lamp holder for E27 bulb (included), brushed brass, touch dimmer (3
steps), 2 m black textile covered PVC cord with plug.
Bulb specification
E27, A++, 6 watt, dimanble (in case own bulb is purchased max 60 Watt)
Color temperature - 2700 K
RA > 90
Lumen - 500 lm
The Lamp Range is tested according to portable lamp: EN 60598-2-4.
Care and maintenance
Please see care instructions on www.menuspace.com
Environmental Guidelines
Menu A/S have chosen to use Polystyrene (PS) material to replace PVC material. The PS material is not as UV and heat resistant as PVC, but when LED bulbs are
used the effect of UV emittance and heating levels will be minimized. Furthermore please note that if incandescent or halogen bulbs are used, the stronger UV
emittance and heat can influence the original appearance of the PS shade by starting a yellowing process which cannot be reversed.
BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF.
Please check the specific rules for electrical installation work in your country.
Some countries may require an authorised electrical contractor.
IMPORTANT
If you have any problems regarding the electrical installation, contact a certified electrician. Always shut off power to the circuit before starting installation work.
The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire shall be destroyed.
WARNINGS
Dispose of plastic bag from packaging and do not allow children to play with it.
- Keep product well out of children’s reach.
- Do not attempt installation of product if you are not competent to do so yourself.
- Consult a professionally qualified electrician if in any doubt.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your device, please use the return and collection system or contact the retailer where the product was purchased. They can take this
product to environmentally safe recycling.