52
Operating Instructions - CPC3050
High-Speed Pressure Controller
CPC3050
Figure 6.4.9.1 - B – Checksum
Figure 6.4.9.1 - C - Termination character
6.4.9.2 Remote Communication Settings
The remainder of the Parameters in the Remote Application present the choice of a numeric entry, a
numeric address entry, or a radio button selection. The parameters that require a numeric entry will
present a numeric keypad with min and max limits for the variable. The parameters that require a numeric
address (for example an IP address) will also present a keypad. Address entries should conform to the
format of the parameter selected. The three screens below show examples of each type.
Numeric entry
Numeric address entry
Radio button selection
i
Setting the Ethernet DHCP to yes will
have a short delay while the DHCP
server is contacted. If a DHCP server
is not found, an error will be indicated.
If DHCP is enabled, the IP address, Netmask and
Gateway are greyed out and locked, these are
controlled by the DHCP server.
Figure 6.4.9.2-A – Remote Communication Settings
