Assembly instructions
Put 2 x Rubber Bumpers (
41
) through the Guide Rods (
17
), and then carefully slide the Weight plates
(36)
down the Guide rods
(17)
.
Important:
The deep grooves on the Weight plates
(36)
MUST all face the back of the assembly and be on the
underside. Insert the Selector rod (
19
) down through the centre holes of the weight stack. Attach the
Selector Pin
(32)
to the top of the Selector rod
(19)
.
Slide the Top weight plate
(35)
down Guide rods
(19)
. When using: Select the desired training weight by
inserting the Selector Pin
(32)
into the deep grooves under the weight plates and into the selector rod.
Notes:
(
51
) is pre-fitted.
Step 4
10
