Assembly and operating lnstructions
Hera lnfrared Door Switch
Type IR-S IR-OS
lntended use
Touch-less sensor switch; this product ís for índoor use only.
� 1.
Disconnect from the mains supply before attempting to mount/ dismount the lighting fixture.
Switch off the automatic circuit breaker! Perrnanent mains connection must be undertaken only
by a qualified specialíst.
2. Faulty parts should only be replaced with original parts.
3. Suitable for switching one LED-converter type Hera LEO 24/5W - LEO 24/250W or Hera Slimlite
lighting rows up to 3 luminaires.
4. To avoid easier assembly the sensor line can be sticked into or removed from the casing.
5. Make sure that IR· sensor is not dirty, otherwise its function can be affected.
6. To avoid rnalfunctions make sure that no objects or a reas (e.g. tiles, adjustable shelves, workt
ops), particularly with wh ite, shi ning or mirror .surfaces, are I ocated in a perimeter of 100 mm
and with space of 300 mm from the IR· sensor.
7. Fasten IR - sensor to any surface.
8. The IR-sensor reacts on approaches of a surface (e.g. doset door). The IR·DS switched on ali
consuming points after a closet door comes in the coverage from one IR • sensor.
9. To guarantee a secure function there must be a distance of at least 4 mm and of about 50 mm
(depending on the reflection surface) between the closed d oor and the IR-sensor. In this area
the IR·DS switched off ali consuming points.
Version IR·DS (with one Sensor)
Sensor line in socket .,Sensor 1"
Shorting plug in socket .,Dummy"
Version IR·DS2 (with two Sensors)
Sensor lines in sockets nSensor 1" and .,Sensor 2"
Shorting plug must be removed from socket ,.Dummy"
-
Do not dispose of electrical appllances in household waste. use separate collection facilities. When
replacing old appliances with new ones, the retailer is obliged by law to accept to take back your old
appliance for dlsposal free of charge.
www.mengual.com
