Mendip Stoves Churchill 5 SE MK5 Dual Control, Руководство по эксплуатации и установке

Страница: 20 / 28

20 of 28
HOW TO REMOVE THE WOODBURNERS INTERNAL PARTS
It is now possible to remove
the top baffle brick by
Li�ing up the le� side and
sliding it to the le� then
dropping it down.
The right hand side brick
can be removed by gently
pulling it down from the
top.
You may find it easier to
remove the cast iron grate
before finally removing the
rear brick.
To remove the vermiculite
brick set take the following
steps: Remove the log guard.
Li� out the 2 base bricks
next to the grate.
Remove the le� hand
vermiculite side brick by
Li�ing the top baffle brick
and pulling the side brick
down from the top.
To remove the upper steel
baffles/ turbulence plates
Firstly li� the upper,
ribbed, turbulence plate,
slide forwards towards the
front of the stove.
This will create enough
space to allow the plate to
drop down so that the baffle
can be removed.
To remove rear steel baffle
simply push this away from
the holding frame, which it
rests on, and twist it to fit
through the opening.
You now have access to the
flue system, whether the
collar is situated on the top
or to the rear of your
stove.