Mendip Stoves Christon 550 insert, Руководство по эксплуатации и установке

Страница: 14 / 32

14 of 32
Mendip Stoves are fi�ed internally with vermiculite heat deflec�on panels and baffles, these panels are designed to ensure the
maximum efficiency and are an integral part of the clean burn process of the stove. These baffles should not be removed other
than for cleaning the stove. Any defec�ve panels should be replaced, small hairline cracks do not need immediate replacement,
however hairline cracks will develop during long term use and should be monitor regularly. When refuelling your stove carefully
place wood fuel into the chamber, impact from logs can cause the heat deflec�on panel to crack
.
COMBUSTION CHAMBERS
HOW TO OPERATE YOUR STOVE
Suitable fuels
Your stove is tested to burn wood. Wood brique�es can also be burnt but special account should be taken of fuel weight.
For a full list of suitable fuels, check with the official solid fuels approvals body, HETAS or Solid Fuel Associa�on. Do not
overload the stove as this can cause excessive heat which will damage the stove (see table on page 7
).
ALWAYS KEEP FUEL LOAD BELOW TERTIARY PORTS AT REAR OF STOVE.
Only use fuels approved for use on hea�ng stoves.
Do not burn liquid fuels, dri� wood, finished wood, sawn wood, pallet wood, chipboard/plywood ,varnished wood or
plas�c coated wood, wood treated with preserva�ves, or any house hold waste.
DO NOT EXCEED SPECIFIED FUEL WEIGHTS.
DO NOT BURN SMOKELESS COAL OR HOUSE COAL.
DO NOT BURN HOUSEHOLD WASTE.
THIS APPLIANCE IS NOT AN INCINERATOR.