11
Arrows:
LEFT arrow key:
Back
to previous menu level or move cursor to the
left.
RIGHT arrow key:
Enter
menu selection or move cursor to the right.
UP arrow key: Move cursor up or increase number
DOWN arrow key: Move cursor down or decrease number
Number SET: In Number SET mode, use arrow keys to change the digits
of the number. Press this key again to move to the next number or finish
entering numbers in All Protocols setting.
Protocols: Press this key to cycle between “All Protocols”, “Recent
Protocols” and “History Protocols”.
μA ‘+’, ‘-‘: While a program is running, you can use these keys to change
the intensity of the microcurrent. Your practitioner should have these set at
a typical default setting for you.
