25
Settings
To change Settings
: press the BACK arrow key to the Main Menu and
press the 5 key. This will take you directly to the Settings menu.
Alternately, press the BACK arrow key and use the UP/DOWN arrows to
select the Manual Run Mode which is number 5 on the Main Menu. Next
press the RIGHT arrow key to enter into the Settings.
To turn ON/OFF key beeping
: press the Number SET key until the edit
cursor has moved to the ON/OFF of key beeping, use UP/DOWN to
change the value. Press SET again when the new value is set.
To turn ON/OFF protocol end beeping
: press SET key until the edit
cursor has moved to the ON/OFF of protocol end beeping, use UP/DOWN
to change the value. Press SET again when the new value is set.
The new settings will take effect after you press BACK arrow key to the
Main Menu. To get back to your protocols, press Protocols.
Tip: When you hit the SET key,
you will get a solid black flashing
cursor for 3 seconds which you
can toggle it ON/OFF.
