Getting Started
Page 15
»
Fasten the HDD/SSD to the board from the bottom side with two M3x8 TX8 socket
head screws (position highlighted in red in the following drawing).
»
Secure the HDD/SSD additionally by fixing it to the front panel with a M3x6 TX8
screw.
»
Apply thread locker to ensure the screws are not loosened by vibrations.
Installing the second HDD/SSD:
»
Place the second HDD/SSD in the slot close to the rear connector on the carrier
board and align it with the guide rails.
»
Align the SATA connector on the HDD/SSD with the SATA connector on the carrier
board.
»
Firmly plug the HDD/SSD into the SATA connector on the carrier board.
