Functional Description
MEN Mikro Elektronik GmbH
25
2.3.2
Connection via 10-pin Ribbon-Cable Connectors
Two additional 10-pin connectors can be assembled that allow ribbon-cable
connection to MEN SA-Adapters. See
Figure 2, Map of the board—top view, on
.
A mounting kit to install two SA-Adapters using an additional front panel was in
preparation at print time of this document. Please see MEN’s
ordering information.
Connector types:
• 10-pin low-profile plug, 2.54mm pitch, for ribbon-cable connection
• Mating connector:
10-pin IDC receptacle, e.g. Elco Series 8290 IDC socket
Table 7.
Pin assignment of 10-pin ribbon-cable UART connectors
10
RI#
9
DCD#
8
CTS#
7
DSR#
6
RTS#
5
DTR#
4
RXD
3
TXD
2
+5V
1
GND
10
9
2
1
