Functional Description
MEN Mikro Elektronik GmbH
16
2
Functional Description
2.1
Power Supply
The board is supplied with +5V, +3.3V and +12V via the CPU board (board-to-
board connector) and via the CompactPCI backplane. For this purpose,
CompactPCI bus connector J1 is assembled.
2.2
Board-to-Board Connector
The F600 side card is attached to a CPU board using a board-to-board connector.
This connector supports special I/O functions from the CPU.
The board-to-board connector is located at the bottom side of the board, so that the
F600 can be attached to the right side of a CPU board.
The board-to-board connector on F600 supports the following interfaces:
• Two SATA channels
• Two USB-to-UART interfaces
• Two additional USB-to-UART interfaces optional
See MEN’s
for available board versions.
2.2.1
Connection
Connector types:
• 114-pin matched impedance plug connector, MICTOR 0.64 mm grid
• Mating connector:
114-pin matched impedance receptacle connector, MICTOR 0.64 mm grid
