MEN BL70S, Руководство пользователя

Страница: 61 / 85

Functional Description
20BL70S00 E3

2018-06-11 Page 61
3.14 Serial Interfaces via SA-Adapter
The BL70S supports:

Two configurable serial interfaces at the front of the BL70S using MEN standard SA-
Adapters

Serial interface 1 (X1) supports:
- UART, IBIS, GPS or SGPIO functionality

Serial interface 2 (X2) supports:
- UART or CAN bus functionality (for CAN bus functionality a special product
version is required)
Figure 10. Position of serial interfaces on BL70S front
For using the 08SA15-00 SA-Adapter with SGPIO functionality at serial
interface 1 (X1) you have to change a setting in the FPGA to switch from
UART to SGPIO. See Chapter 2.7.6 Switching Serial Interfaces on page 34
(Windows) or Chapter 2.8.6 Switching Serial Interfaces on page 39 (Linux).

See the MEN website for ordering information:
www.men.de/products/bl70s/#ord
 Please contact MEN if you have any questions or problems
Serial Interface 2 (X2)
(
COM1)
Serial Interface 1 (X1)
(COM0)