MEN BC50R, Руководство пользователя

Страница: 43 / 49

Organization of the Board
MEN Mikro Elektronik GmbH 43
20BC50R00 E1 – 2015-09-07
6 In WDOG_
EN 1 Signal to reset the watchdog System
0 = Setting this bit to '0' generates a
falling edge. The falling edge
results in a reset of the watchdog.
1 = For every watchdog reset the bit
must be set in sequence '1' -> '0'
to generate a falling edge.
5 Out BIN_OUT[2] 1 Enable signal for the second (2) output
photocoupler. Isolated
output
0 = By setting the bit to '0' the
corresponding coupler is closed.
1 = The default value is '1' and the
corresponding coupler is open.
4 Out BIN_OUT[1] 1 Enable signal for the first (1) output
photocoupler. Isolated
output
0 = By setting the bit to '0' the
corresponding coupler is closed.
1 = The default value is '1' and the
corresponding coupler is open.
3 Out USR_
LEDB (USB) 1 Enable bit for the corresponding user LED
(activity LED for USB interface). USR_
LED
0 = The LED is enabled/on.
1 = The LED is disabled/off (default
value).
2 Out USR_
LEDA 1 Enable bit for the corresponding user LED. USR_
LED
0 = The LED is enabled/on.
1 = The LED is disabled/off (default
value).
1 In BIN_IN[2] - Value of the connected isolated input Isolated
input
0 In BIN_IN[1] - Value of the connected isolated input Isolated
input
Bit Direction Signal
Default
Value
Description Group