Memphis nanoboxx NANO110P, Руководство пользователя

Страница: 5 / 8

POWER CONNECTIONS
FIGURE 3
FIGURE 4
Connect the ground terminal to the closest point on the chassis of the vehicle. Keep this ground wire to less than 39” in
length. Use 8 gauge or heavier wire.
Connect the remote terminal to the remote output of the head unit using 16 Gauge or heavier wire.
Connect an empty fuse holder within 18” of the car battery. Run 8 gauge or heavier cable from this fuse to the amplifier
location. Connect the fuse holder to the BAT+ (+12V) connection on the subwoofer rear panel. .
NOTE: In this connection, the AUTO
TURN OFF switch is in the ON position.
NOTE: In this connection, the AUTO
TURN OFF switch is in the OFF position.
CHASSIS
GROUND
CHASSIS
GROUND
FUSE
FUSE
BATTERY
BATTERY
TO REMOTE TURN-ON
TERMINAL OF HEAD UNIT