2. Mounting Instructions, continued
Fig. 1
Fig. 7
Fig. 4
Narrow
Bi plane clamp set up as
supplied.
Wide
Wing mount on Bi plane
clamp must be rotated 180°
Fig. 2
Fig. 3
Fig. 5a
Fig. 6
Remove this gasket,
rotate 180° and refit
Rotate the
Wing mount
180° and refit
Fig. 5b
Fig. 8
9. Use the “Windshield Thickness Guide” to determine your
windshield thickness, by holding the guide to the edge of your
windshield. Select “A” pads if windshield is 3/16” or
“B” pads if windshield is 1/8”.
10. Use the 5/32” short arm allen wrench to remove the
screw in the wing clamp part of the Biplane clamps. (Fig. 8)
11. Fit your selected pad into Wing clamp and Wing mount by
aligning pads and pressing into place. Repeat for other
Biplane clamp (Fig. 9)
12. Position the Biplane clamps (with Side Wing fitted) over
the existing windshield. Once satisfied with the position,
tighten down the Socket head cap screw to secure the
Biplane clamps in place (Fig 10)
Fig. 9
Fig. 10
