Part No. 2321-0226
2. Mounting Instructions, continued
Fig. 3
Around the fork tin, slide the two parts of the upper clamp to-
gether in the smallest setting, and slip the clamp over the Santo-
prene insert, and align it with the lower clamp as shown in figure
2b.(The cable guide may need to be bent slightly.)
Repeat Step 4. on the throttle side.
5. Slip the windshield mounting plates and windshield onto the
fork clamps, (Fig 3 and 4) and secure the left and right side lock-
ing mechanism.
6. Adjust the height, angle and alignment of the windshield and
tighten
ALL
bolts.
Note: This is a detachable windshield, ALWAYS make sure
the Locking Mechanism is Fully Engaged after installing the
windshield!
Fig. 1
1. Place lower slot into lower bushing.
2. Rotate top slot into place.
3. Secure locking Mechanism.
4. Loosen Allen Bolt to adjust angle,
then re-tighten Allen Bolt.
1
2 3
4
Fig. 4
Fig. 2a
Fig. 2b
CORRECT
Fully engaged
Locking mechanism
NOT CORRECT
R322C/T
LATCH
ASSEMBLY
Trigger Lock Mounting Kit
MS Fats / Slim
Black
First
Bolt
Third
Bolt
Adjustable upper
clamp with tapered
insert
Fixed lower clamp
Warning
Mounting clamps
backwards will cause
damage to you tank
Flex the tapered fork
clamp insert around
the upper fork tin, lip
facing down. Rotate
rearward until the
stopper portion is just
underneath the upper
triple tree
Stopper
Lip
Fig.
2
