Memotec NetPerformer SDM-9120 Series, Руководство по установке оборудования

Страница: 83 / 161

Product Description
Memotec Inc. 4-15
4.8 Console Port
4.8.1 Port
One PC-compatible console port:
•
DB-9 male connector on the SDM-9120/9220/9230 and RJ-45 female on the
SDM-9140
•
TIA-232 (V.24) serial interface
•
Autobaud asynchronous transmission, 1200, 2400, 4800, 9600, 19200, 28800,
38400, 57600 and 115200 bps
NOTE:
The equipment you connect to the console port
must operate at 9600 bps
when you first power up the NetPerformer unit
. Also, if you are connecting to
the console terminal via a modem,
you must set the modem to ignore DTR.
See “Important Console and Modem Settings for Startup” on page 3-36 .
•
Auto-gender DTE/DCE
•
Protocol: VT-100 or PPP
•
Reverse console function provides an outbound port for control of external
equipment using
ASYNC
communication via Telnet
4.8.2 Console Cable
A cable for the console port is included with the SDM-9XXX Series product package.
•
For the SDM-9120/9220/9230 unit, this cable is a standard TIA-232 (V.24)
straight-through cable with DB-9 female connectors at both ends (Ordering part
number:
502-0811-006
).
•
For the SDM-9140 unit, this cable is a USB to RJ-45 console cable (Ordering part
number:
CBLH-CONS-USB
).
► To connect the SDM-9120/9220/9230 cable:
1.
Connect one end of the cable to the SDM-9XXX Series console port, labeled
CONSOLE
on the rear faceplate. See “Rear View of the SDM-9220/9230 UAC” on
page 4-5 .
2.
Connect the other end of the cable to a COM port on the console terminal or PC, or
to a modem for dial-up connection to a remote console.
For computers not equipped with a COM port, this cable can be used with the help of
a USB-to-serial adapter, available in most computer supply stores and/or sites.