charging is complete the LED will flash slowly. The mouse is then ready for use.
3. The Memorex RF Optical Mouse comes equipped to conserve battery life. The
mouse will enter “Sleep” mode after 90+ seconds of non-use. To “Wake” the mouse
simply press any mouse button or move the scroll wheel.
Software Installation:
*Note: You will need to uninstall any existing mice drivers or applications prior to
installing the Memorex RF Wireless Optical Mouse software.
1) Insert the driver CD into your computers CD-ROM drive. The installation
should auto-launch. Follow the on-screen instructions.
If the program does not auto-launch:
1) Browse the computer and select the computers CD-ROM drive.
2) Explore the CD
3) Double-click the Setup.exe file
4) Follow the on-screen instructions.
Technical Support:
If the above suggestions did not answer your questions, please direct your inquiries to
Memorex Technical Support at [email protected] or call 310-891-1680
Monday- Friday 9am-5pm pacific time.
The Memorex RF Wireless Optical Mouse
To obtain optimum performance please read the following instructions carefully prior
to installing the Memorex RF Wireless Optical Mouse.
Hardware Installation Instructions:
1) Open the battery compartment on the RF wireless mouse and set the channel
switch to either Channel “1” or “2”.
2) Insert the 2 AAA batteries into the battery compartment and close the cover.
•
If the Red LED display light is on, the mouse the batteries have power;
otherwise plug the AC adapter into an appropriate power source and
plug the connector into the port on the right hand side of the mouse.
While the mouse is charging the scroll wheel will illuminate.
Содержание RF Optical Mouse
Страница 1: ...RF Optical Mouse...
