15
With the power off, press and
hold the TIMER/SLEEP button
❶
until “TIMER” blinks in the
display. Press and hold the
MEMORY/TIME SET button
❷
until timer hour digits blink in the
display.
1
2
1
Within a couple seconds, “TIMER”
will light in the display to indicate
that the timer is set. When the
actual time matches the time set for
the Timer, the unit will turn on to the
last function (CD or tuner) used.
TO TURN THE TIMER OFF SO
IT IS NOT SET FOR THE NEXT
DAY,
press the TIMER/SLEEP
button again until “TIMER”
disappears from the display.
3
Press the TUNING/CD SKIP/
SEARCH (
)
❶
or (
)
❷
button to set the hour, then press
the MEMORY/TIME SET button
❸
again; the minute digits will
blink. Press the TUNING/CD
SKIP/SEARCH (
)
❶
or (
)
❷
button to set the minutes, then
press the MEMORY/TIME SET
button
❸
again.
3
2
1
2
SETTING THE TIMER
Set the timer to turn the unit on to the Tuner or CD mode at a preset time as follows :
Press the POWER button to turn
the unit on and tune the desired
radio station or insert a CD as
previously instructed.
1
Press the TIMER/SLEEP button a
second time to set the unit to turn
off after 80 minutes. Each
additional press with decrease the
sleep time by 10 minutes. After the
sleep time is set, you can press the
TIMER/SLEEP button at any time
to stop the Sleep function; “SLEEP”
will disappear from the display.
3
Press the TIMER/SLEEP button
and “90” will appear and “SLEEP”
will blink in the display.
2
ACTIVATING THE SLEEP FUNCTION
Set the sleep timer as follows:
SNOOZE
After the timer goes off, you can press the SNOOZE button. This will turn the sound off, and then back on
five minutes later.
OPERATING INSTRUCTIONS (CONTINUED)
The unit will revert back to standby mode one hour after the timer has been activated.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 15
