DISASSEMBLY INSTRUCTIONS
B2-2
(A)
Link Unit
Link Unit
(B)
Main Chassis
2-6: LINK UNIT (Refer to Fig. 2-6)
Set the Link Unit to the Eject position.
Remove the (A) side of the Link Unit first, then remove
the (B) side.
1.
2.
Fig. 2-6
NOTE
When you install the Tension Adjust, install as shown in
Fig. 2-8-B. (Refer to Fig. 2-8-B)
Fig. 2-8-B
2-9: T BRAKE ASS'Y (Refer to Fig. 2-9)
Remove the T Brake Spring.
Remove the T Brake Ass'y.
1.
2.
Adjust the direction of the Marker to inside.
T Brake Spring
Fig. 2-9
T Brake Ass'y
Main Chassis
2-7: LOADING MOTOR ASS'Y (Refer to Fig. 2-7)
Remove the Link Lever.
Remove the Dumper Spring.
Remove the 2 screws
1
.
Unlock the support
2
and remove the Loading Motor Ass'y.
Unlock the 2 supports
3
and remove the Deck PCB (BOT).
1.
2.
3.
4.
5.
1
2
1
Loading Motor Ass'y
Link Lever
Main Chassis
• Screw Torque: 5
±
0.5kgf•cm
Fig. 2-7
Deck PCB
(BOT)
Dumper Spring
3
2-8: TENSION ASS'Y (Refer to Fig. 2-8-A)
Move the Inclined S Ass'y to the back side.
Remove the Tension Spring.
Unlock the support
1
and remove the Tension Arm
Ass'y.
Remove the Tension Adjust.
Unlock the 2 supports
2
and remove the Tension Band
Ass'y.
Unlock the support
3
and remove the Tension Holder.
Remove the SS Brake Spring.
Remove the SS Arm Brake.
1.
2.
3.
4.
5.
6.
7.
8.
3
1
2
2
Tension Adjust
Tension Band Ass'y
Tension Spring
Tension Arm Ass'y
Tension Holder
Inclined S Ass'y
Fig. 2-8-A
SS Brake Spring
SS Arm Brake
Содержание MVR2041
Страница 46: ...M4E3 15B SPEC NO O R NO K144003...