Memorex MVD4540C, Руководство по обслуживанию

Страница: 17 / 79

DISASSEMBLY INSTRUCTIONS
B1-1
1.
1-1:
REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
TOP CABINET/FRONT CABINET/OPERATION PCB
(Refer to Fig. 1-1)
1.
2.
3.
4.
5.
6.
7. Remove the 5 screws
1
.
Remove the Top Cabinet in the direction of arrow (A).
Disconnect the following connector: (CP651).
Unlock the 8 supports
2
.
Remove the Front Cabinet in the direction of arrow (B).
Remove the 2 screws
3
.
Remove the Operation PCB in the direction of arrow (C).
1.
2.
Open Flap to 90˚ and flex in direction of arrow (A), at
the same time slide in direction of arrow (B).
Then lift in direction of arrow (C).
1-3: DVD DECK/DVD PCB (Refer to Fig. 1-3)
1-2: FLAP (Refer to Fig. 1-2)
Fig. 1-1
Fig. 1-2
(A)
Flap
(B)
(C)
Fig. 1-3
1
1
1
1
(A)
2
(B)
1
Top Cabinet
Front Cabinet
2
2
2
2
2
Operation PCB
(C)
2
3
3
2
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Make the short circuit on the position as shown Fig. 1-3
using a soldering. If you remove the DVD Deck with no
soldering, the Laser may be damaged.
Unlock the support
1
and remove the Deck Top Holder
in the direction of arrow (A).
Remove the 2 screws
2
.
Remove the 2 screws
3
.
Disconnect the following connectors:
(CP501, CP8001).
Remove the DVD Deck in the direction of arrow (B).
Remove the 2 screws
4
.
Remove the DVD PCB in the direction of arrow (C).
Remove the 3 screws
5
.
Remove the Front Angle in the direction of arrow (D).
NOTE
When the installation of the DVD Deck, remove all the
soldering on the short circuit position after the connection
of Pick Up PCB and VCR PCB connector.
2
1
Deck Top Holder
2
3
(A)
3
4
DVD Deck
5
4
(B)
DVD PCB
(C)
5
Front Angle
5
Make the sort circuit
using a soldering.
Pick Up PCB
(D)