Memorex MVD4540B, Руководство по обслуживанию

Страница: 22 / 72

DISASSEMBLY INSTRUCTIONS
B3-3
NOTE
1.
2.
In case of the Idler Gear installation, install correctly as
Fig. 3-9-B.
When installing the Middle Gear 2, check if the Middle
Gear 2 is locked correctly as Fig. 3-9-C.
Fig. 3-9-B
[OK] [NG]
Idler Gear Idler Gear
Idler Arm Idler Arm
Fig. 3-9-C
Middle Gear 2
Check Lock
3-9: GEAR (Refer to Fig. 3-9-A)
Unlock the support (1).
Remove the Middle Gear 1/2/3, Idler Gear and Feed
Gear. 1.
2.
Middle Gear 1
Middle Gear 2
Middle Gear 3
Idler Gear
Feed Gear
Fig. 3-9-A
(1)
Main Chassis Ass'y
3-8: RELAY PCB ASS'Y (Refer to Fig. 3-8-A)
Remove the screw (1).
Remove the Relay PCB Ass'y. 1.
2.
Fig. 3-8-A
(1)
Relay PCB Ass'y
Main Chassis Ass'y
NOTE
1. When installing the wire of the Relay PCB, install it
correctly as Fig. 3-8-B.
• Screw Torque: 4
±
0.5kgf • cm
Fig. 3-7-B
Fig. 3-7-C
Should not be engaged.
Check the position of
the Rack Feed Lever.
Moving smoothly
Moving smoothly
Fig. 3-8-B
NOTE
1.
2.
After the assembly of the Rack Feed, check if the Rack
Feed 1/2 is moving smoothly. (Refer to Fig. 3-7-B)
In case of the Rack Feed Ass'y installation, install
correctly as Fig. 3-7-C.
3-10: IDLER ARM 2 (Refer to Fig. 3-10-A)
Remove the Idler Arm 2. 1.
Fig. 3-10-A
Idler Arm 2
Main Chassis Ass'y