Before Updating:
1.Burn the 4 files under \Disc A in the root of CD-R as
Disc A
.
(The 4 files are FLASH.bin, FLASH.bin.sig, Updater.sh, Updater.sh.sig)
2.Burn BDD820.HL file under \Disc B in the root of CD-R as
Disc B
.
Note:
CD-R must be finalized after burned.
First use
Disc A
update unit ,then use
Disc B
update loader.
Otherwise the updating will fail.
Part 1 Updating firmware of unit by Disc A
Step 1
Power on the unit.
Step 2
Press the [Setup] button on the remote control
，
selec
【
General
】
item and press [ENTER] button → select
【
Update Firmware
】
item and
press [ENTER] button→ select
【
CDROM
】
item and press [ENTER]
button.
The Disc tray opens automatically, place
Disc A
on the tray, then press
[Enter] button on the remote control
.
Step 3
The unit will reboot after the tray closed and read automatically.
the Updating process starts, the logo is displayed on the screen
and
【
Flash
】
is displayed on the unit.
Note:
It will continue about 10 minutes.
Don’t shut down the power during the VFD displaying
【
Flash
】.
Step 4
Remove the updating disc after the Disc tray opens automatically.
Then the unit will reboot automatically.
Step 5
Press [SETUP] button on the remote control, select
【
General
】
item and press [ENTER] button → select
【
Software Version
】
and press
[ENTER]button→ select
【
View
】
and press [ENTER] button.
Updating Firmware
Operating Instructions
.
Check the version, if the first line is the following:
MVBD2511-V1.01-2009-8-18
The update is completed successfully.
Step 6
Press the [Return] button return to the
【
Setup
】
menu.
Part 2 Updating firmware of loader by Disc B
Step 7
Press the [Setup] button on the remote control,select
【
General
】
item and press [ENTER] button → select
【
Update Firmware
】
item and
press [ENTER] button→ select
【
CDROM
】
item and press [ENTER]
button.
The Disc tray opens automatically, place
Disc B
on the tray, then press
[Enter] button on the remote control.
Step 8
Wait for about
2 minutes
after the tray closed and read
automatically.
Step 9
Remove the updating disc after the Disc tray opens automatically.
Then the Updating process starts, and it will continue about
3 minutes
.
Then the unit will reboot automatically.
Note:
Don’t shut down the power during Disc tray opening.
Step 10
Press [SETUP] button on the remote control, select
【
General
】
item and press [ENTER] button → select
【
Software Version
】
and press
[ENTER]button→ select
【
View
】
and press [ENTER] button.
