FEATURES
Cassette tapes have two erase-protection tabs ---- one for each side. To protect a recording from being
accidentally recorded over or erased, use a screwdriver to remove one or both of the cassette tape’s erase-
protection tabs.
If you want to record on a tape side after you have removed the erase-protection tab, place a piece
of strong plastic tape over that side’s erase-protection hole.
Notes:
•
Be sure you cover only the hole originally covered by the erase-protection tab.
•
Removing the erase-protection tabs does not prevent a bulk eraser from erasing a cassette tape.
Erasing a Cassette Tape
If you no longer want a recording, you can record over it or erase it.
To erase a previously recorded section of a tape, simply record over it.
To erase the entire cassette tape, record silence to the end with all controls set to their minimum
settings and the microphone(s) turned off.
You can quickly erase both sides of a cassette tape using a bulk tape eraser.
Cleaning the Tape-Handling Parts
Dirt, dust or particles of the tape’s coating can accumulate on the tape heads and other parts that the
tape touches. This can greatly reduce the performance of the cassette player. Use the following
cleaning procedure after every 20 hours of tape player operation.
file:///G|/Private/Joe%20Tumminelli/Owner's%20Manuals/MKS2450/MKS2450.htm (13 of 16) [7/29/2002 4:07:34 PM]
