10
OPERATION (CONTINUED)
Insert the Universal Dock included
with your iPod
(A) into the iPod
compartment (B) (as shown),
making sure the tabs are facing
front, and slip the tabs into place.
Press the rear side of the Universal
Dock until it is positioned inside the
iPod compartment.
NOTE: If using the iPhone, locate
the correct Universal dock to use
as shown on page 21.
(A)
(B)
1
The iPod will charge as long as
this unit is connected with the
AC adapter.
Please see the next page for
instructions on using an iPod with
this unit.
3
Slide the iPod (A) into the
Universal Dock (B) (as shown).
Gently push down so the
connector on the iPod slides onto
the connector on this unit.
(A)
(B)
2
NOTES:
• When the iPod is connected
to this unit, it will be in the
Pause mode. When the iPod is
removed, the unit will remain in
iPod mode.
• To remove the Dock, insert your
finger (or other object) into the
gap in the Dock, then gently pull
the Dock out to remove it.
• CHARGING: When the iPod is
inserted into the dock, whether
this unit is on or off, the iPod’s
battery will charge until it is full.
• While there is an incoming call
for the iPhone, the music will
pause. After finishing the call,
the music will resume playing.
INSERTING AN iPod
