14
OPERATION (CONTINUED)
Locate the correct iPod dock to
use as shown on pages 28-29.
Insert the dock (A) into the iPod
compartment (as shown), making
sure the dock’s two tabs are
facing front, and slip the tabs into
place.
(A)
1
The iPod will charge until it is full.
Please see the next page for
instructions on using an iPod with
this unit.
3
Insert the iPod (A) onto the
connector (as shown). Gently
push down so the connector on
the iPod slides onto the
connector on this unit. Push the
iPod compartment back in gently.
(A)
(B)
2
NOTES:
• When the iPod is connected to
this unit, it will be in the
Pause mode.
• To remove the Dock, insert your
finger (or other object) into the
gap in the Dock, then gently pull
the Dock out to remove it.
•
CHARGING:
When the iPod is
inserted into the dock, whether
this unit is on or off, the iPod’s
battery will charge until it is full.
• For the iPod nano 1st
generation, make sure to slide
the connector to the left before
inserting the included dock
(No.8).
INSERTING AN iPod
All manuals and user guides at all-guides.com
