5. Repeat Steps 1-4 for each message you want to lock.
6. To unlock a message, repeat Steps 1-3, then repeatedly press
SEARCH button until OFF appears. Press MODE button to
confirm. The recorder unlocks the message you selected.
ERASING MESSAGES
You can erase an individual message or all the messages in a folder.
Erasing a Single Message
1. Select the message you want to erase (see “Skipping Messages”
on Page 9-10).
2. Hold down ERASE button for about 1 second. The
flashes.
3. Press ERASE button again. The recorder beeps and erases the
message, renumbering the remaining messages.
Erasing All Messages in a Folder
1. Select the folder that contains the messages you want to erase
(see “Selecting a Folder” on Page 7-8).
2. Hold down ERASE button for about 3 seconds. The
flashes
and ALL appears.
3. Press ERASE button again. The recorder beeps and erases all
messages in the folder you selected (except any message you
locked).
To skip the current message and go to the previous message, press
PLAY/STOP button(if you are playing back a message), press
SEARCH
button twice, then press PLAY button. The recorder
beeps and the message number changes.
To skip the current message and go to the next message, press
PLAY/STOP button (if you are playing back a message), press
SEARCH button
once, then press PLAY/STOP button. The
recorder beeps and the message number changes.
Note: If you do not press PLAY/STOP button to stop playback, the
recorder automatically plays back all of the messages after the one
you select.
USING INTRO. SCAN
Follow these steps to set the recorder to play the first 5 seconds to
each recorded message.
1. If you are playing back a message, press PLAY/STOP button
2. Press MODE button twice
3. Repeatedly press SEARCH button until ON appears. Press
MODE to confirm.
4. Press PLAY button. The recorder plays the first 5 seconds of
each message, starting from the current message to the last
message.
5. The recorder automatically stops after it plays the last message.
LOCKING A MESSAGE
Note: You can lock and unlock any stores messages.
Follow these steps to lock a message so the recorder will not
accidentally erase it.
1. If you are playing back a message, press PLAY/STOP button.
2. Select the message you want to lock (see “Skipping Messages”
on Page 9-10).
3. Repeatedly press MODE button until
appears.
4. Repeatedly press SEARCH button until ON appears. Press
MODE button to confirm. The recorder locks the message you
selected.
10
11
Erase function activated
Untitled-1
9/6/02, 11:45 AM
6
