MEMOLUB® PLCD (PLC)
Lubricant dispenser
www.memolub.com
7
/
7
Replacing the lubricant cartridge
Hazard and
safety
instructions
•
Attention! The red
casing bottom
part contains a
pressurized
spring. Do not
open!
1
2
•
Leq < 70 dB
•
Employ
MEMOLUBs only
for the lubrication
of machines.
•
Use only with
original
cartridges.
1. Unscrew MEMOLUB® (1)
from MEMO (2). MEMO
remains screwed to the
point of application.
2. To open, place the
lubricator on a flat surface.
Press the hood downward
and turn the black ring
counterclockwise.
3. Remove the label from
the replacement cartridge.
Enter the start date and the
exchange date.
4. Press the air
carefully out of the
cartridge.
5. Set the cartridge on
the casing.
4. Carefully remove the
cover of the cartridge.
Place the casing upside-
down on the cartridge.
5. Turn the casing over
together with the cartridge.
Only for grease cartridges
Only for oil cartridges
6. Put the hood over
the assembled casing
and the cartridge.
7. Press the hood
downward and turn the
black ring clockwise.
8. Screw the
MEMOLUB® onto the
MEMO.
Note: If necessary,
prepare the MEMOLUB®
with a manual grease
gun
(only for grease
cartridges).
