TG2008214-MM-00
21 of 23
20180910-Ver1
BURNER CLEANING:
1. Clean the exterior of the burner with a brass brush. Use a metal scraper to remove stubborn
stains.
2. Clear clogged ports with a straightened paper clip. Never use a wooden toothpick as it may
break off and clog the port.
3. If insects or other obstructions are blocking the flow of gas through the burner, call customer
service at 1
– 888 – 837 – 1380. Make sure to center the burner over the orifice.
TO REINSTALL THE MAIN BURNERS:
1. Insert the burner over the main burner gas valve.
2. Make sure the valve orifice is inside the burner tube.
Firmly seat the valve orifice into the burner tube. Make sure the valve orifice is inserted
STRAIGHTLY
into the burner tube.
Burner flames will be yellow, with excessive noise, lifting or flash back if the burner is not
installed properly.
3. Insert the fixing bolt of the ignition electrode & wire and tighten.
4. Insert the burner fixing bolt and tighten.
Step 3
Step 2
Step 4