21
Lighting Illustration
Push and slowly turn the Searing/Rear Burner knob to IGNITE/ON
position.
Keep pushing the knob until the burner is lit. Once it is lit,continue
to press and hold for another 15 seconds to ensure the burner
stay lit.
If burner is not lit, turn the knob to OFF position and repeat the
lighting procedure.
1
2
IGNITE / HI
LO
OFF
1
3
2
Push and slowly turn the U-Shape Burner knob to IGNITE/HI
position
Keep pushing the knob until the burner is lit.
If the burner is not lit, turn the knob to OFF position and repeat
the lighting procedure.
1
2
1.If the burner will not light after several attempts them the burner can be match lit, before using the match allow
5minutes for any accumulated gas to dissipate.
2. Clip a paper match on one end of the lighting rod.
3. Light match.
4. Hold lighting rod and insert lighted match right next to the burner ports or ceramic file.
5. Push and turn the designated control knob to IGNITE/HI.
6. Burner should ignite immediately.
Match lighting
3
3