User guide
Mobile operating hours reader M-WRG-ALGH
- 10 -
Meltem Wärmerückgewinnung GmbH & Co. KG
Am Hartholz 4 · D-82239 Alling
[email protected] · www.meltem.com
V E N T I L AT I O N T H E R I G H T W AY
V E N T I L AT I O N & H E AT R E C O V E R Y
6
Inserting the batteries
►
Remove the cover (item 1 in Fig. 5) from the battery compartment on the back of the mo-
bile reader. To do this, pull the cover down as far as it will go, then lift off.
►
Insert the batteries supplied in the battery compartment.
NOTE
Make sure that the polarity symbols on the batteries match the polarity symbols in the
battery compartment. The mobile reader may be damaged if the batteries are wrongly
inserted.
The mobile reader initialises when the batteries are inserted. The following information
appears on the LCD display:
—
First all available symbols are displayed.
—
Then the mobile reader’s software version is displayed, e.g. “r003”.
—
The mobile reader is then in Recognition mode (see section 7 on page 11).
►
Attach the cover to close the battery compartment.
Fig. 5:
Remove battery compartment cover
1
Fig. 6:
Insert batteries in battery compartment
1
2
