Listening
1 Set the VOLUME control to minimum and press the power switch button, the Power LED will confirm
the power of the unit.
2. Set the INPUT SELECTOR on the source desired to play.
3. Adjust the volume of the amplifier by using the VOLUME of the control.
Troubleshooting
Symptom
Cause
Remedy
No power
supplied to unit
Inputs
The amplifier has four RCA inputs for various audio components and one XLR input that is balanced.
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong
with this component, check the points below. Sometimes the trouble may lie in another component. Investigate
the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest MELODY
authorized service center or your dealer to carry out repair work.
Power plug is disconnected from outlet Check that power cord and insert the plug
securely into outlet
No sound
Connecting cords are disconnected
from terminals, or connected
incorrectly
Check if connections between external device
and the amplifier are connected correctly.
No sound from
one speaker
Connecting cords or speaker cords
are disconnected on the side.
Verify that the cables between amplifier and
speaker are well- connected according to the
different polarity.
The position of the input selector does
not correspond to the component to be
played back.
Check if the input selector corresponds to
the input source that you want to listen.
Components:
6
Mundorf M-Cap Capacitors Supreme Silver-Oil, Nichicon Gold Tune Capacitors, Solen Gold Label Capacitors,
Supreme Mundorf M-Resist Resistors selected at 1% of tolerance for the entire circuit, Melody Power
transformers with oversized OCC filament, Ceramic sockets with terminals in gold OCC, Connectors Speaker
of the WBT, PIN-RCA Connectors by CMC 816, Black finish lacquer.
Regulation of BIAS
This amplifier has the adjustment of the BIAS that is automatic, so you do not need any manual adjustment.
