EN
Instructions for use
BEFORE USE
Make sure that all products’
packaging has been removed.
Some parts of the appliance
have been lightly greased.
appliance is used a light smoke
may be detected. After a short
time, this smoke will disappear.
FILLING WITH WATER
deposit with water to be able to
work with steam.
Open water inlet lid.
Fill the deposit taking care to
observe the MAX level (Fig.1).
Close water inlet lid.
USE
Extend the cable completely
before plugging it in.
Connect the appliance to
the mains.
Turn the thermostat control to the
desired temperature position.
Do not use temperatures higher
than those indicated on the
garments to be treated.
•
fibres (Polyester, Nylon...) and silk.
Temperature for synthetic
•• Temperature for wool.
••• Temperature for cotton.
(Minimum temperature for
steam ironing)
MAX Temperature for linen.
If garment has various kinds of
temperature. (For example, select
the temperature for polyester
for an article made out of 60%
polyester and 40% cotton).
Wait until the pilot light (F) has
gone out which will indicate that
the appliance has reached an
adequate temperature.
During the appliance’s use the
pilot light (F) will come on and
heating elements are working, and
therefore maintaining the desired
temperature.
DRY IRONING
regulator that permits dry ironing
(without steam) when placed in the
1 position.
STEAM IRONING
It is possible to iron with steam
with water and the adequate
temperature is selected.
STEAM FLOW CONTROL
The appliance has a control knob
(C) that allows getting the control
SPRAY
The spray can be used in both
steam and dry ironing.
Press the spray button (A) to use
this operation.
The spray button has to be
pressed repeatedly to release
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
