2.1.25. Its normal for the oil fin heater to make a
noise while heating.
2.2. Personal safety:
2.2.1. CAUTION: Do not leave the appliance
unattended during use as there is a risk of an
accident.
2.2.2. This appliance is only for domestic use,
not for industrial or professional use. It is not
intended to be used by guests in hospitality envi-
ronments such as bed and breakfast, hotels, mo-
tels, and other types of residential environments,
even in farm houses, areas of the kitchen staff in
shops, offices and other work environments.
2.2.3. This appliance is not intended for use
by persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
2.2.4. This appliance is not a toy. Children should
be supervised to ensure that they do not play
with the appliance.
2.3. Use and care:
2.3.1. Fully unroll the appliance’s power cable
before each use.
2.3.2. Do not use the appliance if the parts or
accessories are not properly fitted.
2.3.3. Do not turn the appliance over while it is in
use or connected to the mains power supply.
2.3.4. Unplug the appliance from the mains
power supply when not in use and before under-
taking any cleaning task.
2.3.5. This appliance should be stored out of
reach of children.
2.3.6. Do not store the appliance if it is still hot.
2.3.7. Never leave the appliance unattended when
in use and keep out of the reach of children.
2.3.8. If for some reason, the appliance were
to catch fire, disconnect the appliance from the
mains power supply and
DO NOT USE WATER
TO PUT THE FIRE OUT.
2.4. Service:
2.4.1. Make sure that the appliance is serviced
only by suitably qualified technician, and that only
original spare parts or accessories are used to
replace existing parts/accessories.
2.4.2. If the power cord is damaged, the
manufacturer or its service agent or a similarly
qualified person must replace it in order to avoid
a hazard.
2.4.3. Any misuse or failure to follow the
instructions for use renders the warranty and the
manufacturer’s liability null and void.
3. Instructions for use
3.1. Before use:
3.1.1. Remove the appliance’s protective film (if
applicable).
3.1.2. Before using the product for the first time,
clean in the manner described in the cleaning
section.
3.2. Assembly:
The heater is packaged with the feet unattached.
You must attach them before operating the heater.
WARNING: Do not operate without feet at-
tached. Operate the heater only in upright
position (feet on the bottom, controls on the
top), any other position could create a hazard-
ous situation
1. Place the radiator body upside-down on a
scratch-free location, make sure it is stable and
will not fall.
2. Screw off the wing nuts from the U-shaped
bolt provided, attach the U-shaped bolt to the U-
facing flange between first and second fins (near
the front cover).
3. To attach the castor mounting plate to the ra-
diator body, you should insert the threaded ends
of the U bolt in the holes on the castor mounting
plate.
4. Screw the wing nuts back to the U bolt and
fasten the wing nut properly.
Note: do not over tighten, which may cause the
damage of radiator flange.
5. Screw off spherical nut from the castor, align
the shaft to the hole of the castor mounting plate,
insert in, and screw on the spherical nut.
6. Repeat 2, 3, 4 and 5 on the rear of radiator for
mounting of the rear castors.
