3.
4.
5.
Attaching the Brackets to the Chassis
Install 8 cage nuts (D) in the desired 1U slots of the rack: 4 cage nuts in the non-extractable side and 4 cage nuts in the extractable side.
Installing the Cage Nuts
While your installation partner is supporting the system’s weight, perform the following steps:
Attach the two rack mount blades (B) to the back side (FRU side) of the rack by inserting four M6 screws (E) in the designated cage nuts. Do not
tighten the screws yet.
Attaching the Brackets to the Rack
While each rack U (unit) consists of three holes, the cage nut should be installed vertically with its ears engaging the top and bottom
holes only.
Содержание MTEF-KIT-C
Страница 6: ......
