Mellanox Technologies Inc. 350 Oakmead Parkway, Sunnyvale, CA 94085 Tel: 408-970-3400 Fax: 408-970-3403 www.mellanox.com
IS5025/5030/5035 Installation Guide
Document Number
3135
Rev 1.0
Installing the Switch in the Rack
Minimum and Maximum Rack Depth for these switches
Make sure that the Installation kit you have is compatible with your rack.
To use the IS50XX series switch in a rack deeper than 50cm, order the switch with the standard
depth, or order the MIS000083 installation kit. The both of these solutions will allow you to install
the switch in a 19” rack whose vertical supports are between 50cm and 80cm apart.
Table 1 - Switches and Rail Kits for Various Rack Depths
Table 2 - Mellanox Part Numbering Legend
Place
Field
Decoder
IS
System Type
InfiniScale Switch
50
Model
Family
FF
Form factor
25 = 36 Ports Unmanaged
30 = 36 Ports and Chassis Management with limited
Fabric Management
35 = 36 ports and Fabric Management
C
InfiniBand Port
Config.
Q= QDR, D= DDR
-
Separator
P
# of Power
Suplies
0=0, 1=1, 2=2....
M
Depth of the
Unit
S = standard depth, B = short depth
Y
Air Flow direc-
tion
R= Connector side to PSU side airflow
F= PSU side to Connector side airflow
R
RoHS
C=RoHS5, X=RoHS6
Rack Size
Switch Standard/ Short
Rail Kit #
50cm to 80cm
Short
MIS000083
Standard
MIS000085
38cm to 50cm
Short
MIS000079
