
Melive Technology Co., Ltd
- 6 -
Video Mode
Video mode screen
Once the camera is turned on, it goes to the video capture mode by
default. Press SHOOT button to start recording. When the recording
starts, you will see the red lights start flashing. To end recording, press
the SHOOT button again.
To enter the Settings menu, press the POWER button (press and release
immediately-if it is held too long the camera will switch off).
Note: The Setup menu is depending on the active mode. If the video
mode is active, it will display video capture settings or if the Picture mode
is active, it will display the Image capture settings.
By default, video mode is the active mode when you turn the device on.