12
Helpful Hints for Brewing
Fresh Water
For optimal results, use fresh water daily. If you haven’t used your
machine for a few days, follow steps 1-7 in section “Before Using
Your One:One
™
Pod Brewing System” pages 6-9.
Note: If Water Tank becomes dry for 3 or more days, revisit section
“Before Using Your One:One
™
Pod Brewing System,” steps 1-7.
Javapods and Teapods
Remember to remove pods after use. If a pod is left inside the
machine for some time without having used the system, remove it
and see “Before Using Your One:One
™
Pod Brewing System,” page
6, before attempting to brew coffee or tea.
Use only specially designed Melitta
®
javapods
™
or Cooper’s
®
teapods
™
in your One:One
™
Pod Brewing System. The use of loose
ground coffee, pods or tea bags not designed for the One:One
™
,
may result in poor coffee or tea, and could possibly damage the
machine.
Never use torn javapods or teapods as this could clog the machine
and damage it. Each javapod or teapod is pre-portioned with the
optimal amount of coffee or tea required per cup.
Care and Cleaning
CAUTION: Do not immerse cord, plug or machine in water or other liquid.
1. Always unplug the appliance before cleaning.
2. Clean the outer surface of the unit and the Water Diffuser with a
damp cloth.
3. Remove and disassemble the Pod Holder, Pod Chamber and
Drip Spout. To seperate Pod Chamber
and Drip Spout, remove Drip Spout,
press Lever on the back side of the
Drip Spout, see Figure 13.
Lever
FIGURE 13
