Melitta Caffeo Solo & Milk, Руководство по эксплуатации, Страница: 27 / 278

Operating Instructions: Melitta ® Solo ® & Milk | 1829-0618 | 2018-08
27
Other settings
GB
Descaling phase 2 ( ):
When illuminates, proceed as follows:
■
Ensure that the coffee grounds container
is placed under the steam pipe with the
hose.
■
Turn the valve switch 11 clockwise until
it stops. is fl ashing. Water will fl ow
intermittently into the coffee grounds
container (takes about 10 minutes).
is then illuminated.
■
Empty the drip tray and coffee grounds
container.
■
Reinsert the drip tray and put the coffee
grounds container back under the steam
pipe.
illuminates.
■
Remove the water tank and rinse
thoroughly with clear water.
■
Fill the water tank with tap water up to
the max. mark.
■
Insert the water tank.
■
Press the button to continue with the
descaling programme. is fl ashing.
Water fl ows into the coffee grounds
container.
Descaling phase 3 ( ):
When illuminates, proceed as follows:
■
Turn the valve switch 11 anticlockwise
until it stops. Water fl ows inside the
appliance into the drip tray.
■
When is illuminated, empty the drip
tray and the coffee grounds container
and reinsert them. When
is
illuminated, the descaling programme is
fi nished.
■
Insert the water fi lter if necessary
("Water hardness and fi lter", page 23).
Other settings
Energy-saving mode
After the last action, the appliance
switches automatically (depending on the
settings) to the energy-saving mode. The
appliance is factory-set at 5 minutes
.
■
Switch on the device.
■
Press the and buttons
simultaneously until fl ashes.
■
Press the button twice.
illuminates.
■
Press the button until one of the four
times is set. The time is displayed by the
beans on display
9.
Display Time
5 minutes
(factory setting)
15 minutes
30 minutes
fl ashing
off
■
Press the button to con fi rm the
setting.