70
14
Thoroughly rinse the water tank, fill it to the max. mark with fresh tap
water and reinsert it.
→
The button for steam dispensing
illuminates.
15 Press the button for steam dispensing
.
→
Phase 2 is completed.
Phase 3
During Phase 3, three bean symbols
are shown on the display.
→
The valve symbol
flashes. Water flows out of the steam pipe into the
vessel. Then the valve symbol
illuminates.
16 Turn the valve switch anti-clockwise to close the valve.
→
Water flows inside the appliance into the drip tray. Subsequently, the symbol
for the drip tray
illuminates.
17 Empty the drip tray and the coffee grounds container and then reinsert
them.
18 Wait until the steam pipe cools down and slide the whisk onto the steam
pipe, from below, until it locks into place.
→
The ON/OFF button
illuminates after a short heat-up phase.
The buttons and the bean symbols
illuminate.
The appliance is ready for operation.