Melitta BARISTA T Скачать руководство пользователя

Страница: 28 / 31

Care and maintenance

ENGLISH

ATTENTION

A water filter may be damaged if it is

screwed in during the descaling pro-

gramme.

Remove the water filter when the appli-

ance requests you to do so (see Fig. 25,

page 60).

Place the water filter into a vessel filled

with tap water during the descaling

programme.

The water filter can be reinserted and

reused when the descaling programme

is complete.

Requirement:

The ready symbol appears

on the display.
1. Press the "menu/ok" button for 2 sec-

onds.

The menu appears on the display.

2. Navigate to the

Care

Descaling

menu.

3. Use the arrow buttons to select

Start

and confirm with "menu/ok".

4. Follow the further instructions on the

display up to the end of the descaling

programme.

The ready symbol appears on the

display.

9.8 Setting the water hardness

The set water hardness influences the fre-

quency of descaling. The harder the water,

the more frequently the appliance has to

be descaled.

Information

The water hardness cannot be set if

you use a water filter (see section 9.9,

page 60).

Determine the water hardness with the

enclosed test strip. Observe the instruc-

tions on the test strip packaging and in the

table

Water hardness range, page 62

Requirement:

The ready symbol appears

on the display.
1. Press the "menu/ok" button for 2 sec-

onds.

The menu appears on the display.

2. Navigate to the

Settings

Water hard-

ness

menu.

3. Use the arrow buttons to select the

water hardness range and confirm with

"menu/ok".

4. Exit the menu with the

Exit

command.

The ready symbol appears on the

display.

9.9 Using a water filter

The use of a water filter extends the ser-

vice life of the appliance and the appliance

has to be descaled less frequently. The

water filter contained in the scope of deliv-

ery filters calcium and other pollutants out

of the water.

Fig. 25: Screwing/unscrewing the water

filter

The water filter

(47)

is screwed into and

unscrewed from the thread

(46)

on the

base of the water tank

(48)

using the

screwing aid at the end of the enclosed

coffee spoon

(1)

Inserting the water filter

Information

Place the water filter into a vessel filled

with fresh tap water for a few minutes

before inserting it.

Requirement:

The ready symbol appears

on the display.

Содержание BARISTA T
































Результаты поиска

Содержание BARISTA T

Отзывы:

Похожие инструкции для BARISTA T

Бренды по названию

Популярные бренды

Melitta BARISTA T, Руководство по эксплуатации

Результаты поиска

Содержание BARISTA T

Отзывы:

Похожие инструкции для BARISTA T

Бренды по названию

Популярные бренды