Melissa 16520012, Руководство пользователя

Страница: 20 / 26

20
c) In this position the thermostat
will start the appliance
automatically when the
temperature will drop below,
or stop automatically when the
temperature is beyond the preset
temperature.
4. Always turn off the appliance
using the on/off button and unplug
it when you are finished with it.
Please note that the appliance will
remain hot for a while after you
switch it off.
Caution! The appliance is equipped
with overheat protection which
automatically stops the appliance
if it becomes too hot during use
or if a technical fault occurs. Turn
the appliance off, remove the plug
from the mains socket and allow the
appliance to cool down before using
again. Should the appliance be faulty,
it should be repaired by a professional.
CLEANING
When cleaning the appliance, you
should pay attention to the following:
• Remove the plug from the mains
socket, and allow the appliance
to cool down completely before
cleaning it.
• Never submerge the appliance
in water and make sure no water
enters the appliance.
• Clean the appliance by wiping
it with a damp cloth. A little
detergent can be added if the
appliance is heavily soiled.
• Do not use scouring pads,
steel wool or any form of strong
solvents or abrasive cleaning
agents to clean the appliance,
as they can damage the external
surfaces of the appliance.
• Keep the ventilation openings free
of dust and dirt.
• IMPORTANT! Allow to dry
completely after cleaning. Do not
use the appliance if it is damp.
• Always clean the appliance before
putting it away if it is not to be
used for a prolonged period.
FOR UNITED KINGDOM ONLY
Plug wiring:
This product is fitted with a BS 1363
13-amp plug. If you have to replace
the fuse, only those that are ASTA or
BSI approved to BS1362 and with a
rated current of 13 amps should be
used. If there is a fuse cover fitted, this
cover must be refitted after changing
the fuse. If the fuse cover is lost or
damaged, the plug must not be used.
You must also check if the socket
outlets in your home fit with the plug
of the appliance. If the socket outlet
in your home does not fit with the
plug, the plug must be removed and
disposed of safely as insertion of the
plug into the socket is likely to cause
electric hazard.
As this product is a class II appliance,
the pin of BS plug for earth connection
is false.