20
7. Barbeque (default 1600 W)
8. Milk heating (default 1400 W)
9. Water boil (default 1400 W)
10. Soup (default 1400 W)
11. Steam (default 1400 W)
12. Chafing dish (default 2000 W)
13. On/off indicator
14. Temperature/power indicators
USE
1. Plug in. The indicator (13) flashes.
2. Switch the appliance on by pressing the On/off button (1). The indicators (13,
12 and 2000 W) remain lit.
3. Choose the desired function by pressing the Menu (4) button one or more
times.
4. Choose the desired power setting or temperature by pressing the + and –
buttons one or more times.
5. Switch the appliance off by pressing the On/off button. The fan continues
to run for a short time after the appliance has been switched off. Only
unplug the appliance once the fan has stopped so that you are sure that the
appliance has cooled sufficiently.
Troubleshooting
You may occasionally experience problems using the appliance. The table below
shows how the errors should be dealt with.
Symptom
Problem
Solution
A signal is heard, and
all indicators flash.
The pan is unsuitable.
The pan is not in the
middle of the cooking
plate.
Use a suitable pan.
Position the pan correctly.
The appliance cuts
out and the “1600 W”
or “1400 W“ indicator
flashes.
Current too low/high.
Connect the appliance to a
suitable power outlet.
The appliance cuts
out and the “800 W”
indicator flashes.
The ceramic plate has
overheated.
Switch off the appliance and
allow it to cool completely.
The appliance cuts
out and the “400 W”
indicator flashes.
The overheating cut-
out has tripped.
Switch off the appliance and
allow it to cool completely.
Clean the air intake and vents.
If the problem is not solved,
contact the point of sale.
