Melink ML1SMC20-1080P, Инструкция по эксплуатации

Страница: 11 / 56

11
3. Connect the power adapter plug to an AC
network socket. The parameters of the socket
power should comply with the parameters
stated on the power adapter rating plate or in
this instruction manual.
The device may also be powered by inserting the USB
plug into a USB port with 5 V voltage in an external de-
vice, e.g. a PC.
4. The device will be ready for pairing when the
red light flashes. Then follow the prompts in the
app. Scan the QR code when the LED is flash-
ing red. After the device reads the QR code
correctly, you will hear a beep and the LED will
flash blue. The LED lights up solid blue when the
device is paired properly.
5. To turn off the device, disconnect it from the
power source.
Resetting device and connecting to another account
To reset the device, press and hold the SET button on the
back of the device until you hear a beep. Wait for a while
for the camera to calibrate before re-pairing.
To link a device to a new account in the MELINK applica-
tion, you must first disconnect it from the previous account.
This operation should be done in the application.
Photo album
Saved photos and video recordings made in the applica-
tion are in the camera control panel in the “Photo album”
tab. To reveal the tab, swipe the control panel up