8 GB
voltage required for mains plug
6
(230–240 V∼, 50 Hz).
Always check the product, the
pump
3
and the mains adapter
4
for any damage before con-
necting it to the mains.
A damaged product represents
the danger of death from elec-
tric shock.
Never open any of the compon-
ents of the electrical equipment
or insert any objects into the
same components. This will pose
a risk of fatal injury from electric
shock.
Never touch the mains adapter
4
or main plug with moist or
wet hands.
Ensure that the mains adapter
4
or main plug never comes into
contact with water or other liq-
uids.
Do not use the power cable for
purposes for which it was not
intended e.g. for carrying the
pump, hanging it up or to pull the
mains adapter
4
out the plug.
Keep the lead away from heat,
oil, sharp edges or moving
equipment parts. Damaged or
tangled leads increase the risk
of an electric shock.
Dispose of the electrical parts of
the product if the cable is
damaged or if you find any kind
of mechanical problems. The
electrical parts of the product
and all associated items cannot
be replaced.
Only carry out work on the
product if the mains plug is dis-
connected from the mains.
Never leave the pump running
without water.
The product is only suited for
use with the included mains
adapter
4
(Model No.
KCAC-1200250).
To switch the product off com-
pletely, unplug the main plug
from the socket.
The LEDs are not replaceable.
If the LEDs fail at the end of their
lives, the entire product must be
replaced.
Before first use
Carefully unpack the product and accessories.
Place the water container
7
on an even and
level surface near a power socket
(230–240 V∼, 50 Hz).
Ensure that there are no objects near the area
which could get damaged by water spray
whilst the product is in use.
