26 GB/IE
Note:
In constant sunlight (depending on the season) the
drained rechargeable battery should take two to ten days to
charge.
Replace the rechargeable battery
8
if the light output does not
improve after charging (Fig. B + C).
Installing the product
Install the product in accordance with Fig. A
1. Place the main unit
6
on to the pole
4
.
2. Insert ground spike
5
into the pole
4
with the tip facing
downwards.
3. Turn the joint screw
3
counter-clockwise to adjust the angle of
the lamp head
2
as well as the angle of the solar cell unit
1
.
4. Tighten the joint screw
3
after adjusting the angle.
For optimal results, place the product in a location where the
solar cell unit
1
is exposed to direct sunlight for as long as
possible.
To adjust the angle of incidence, loosen the joint screw
3
to
position the solar cell unit
1
correctly.
Then tighten the joint screw
3
.
Do not place the product under shrubs, trees, awnings, etc. This
will reduce the incidence of sunlight (see Fig. F).
Position the product so the solar cell unit
1
is not covered or
shaded.
Make sure the solar cell unit
1
is not impacted by other light
sources, e.g. yard- or street lighting, or the light will not switch on
at twilight.
