MELINERA 271489, Инструкции по эксплуатации и безопасности, Страница: 6 / 18

6 GB/IE
and user maintenance shall not be made by
children without supervision.
Ensure that the product is installed by suitably
experienced or qualified persons only.
CAUTION! RISK OF OVERHEATING!
Do not operate the light chain inside the pack-
aging.
After use, keep the light chain in the packaging
to prevent unwanted damage.
Do not pull the light chain cable and make
sure it is laid down properly so that no one
walks or trips over it.
Do not attach any other objects to the product.
Avoid the danger of
death from electric shock!
Before use, ensure that the mains voltage
available is the same as the required operat-
ing voltage for the device (220–240 V∼).
Before connecting the device to the mains you
should always check the light chain and the
mains adapter for any damage.
Never use the light chain if you discover that
it is damaged in any way.
This light set‘s external flexible wiring is non-
replaceable. Hence if it becomes damaged
you must dispose of the entire light set.
Never open any of the electrical parts or in-
sert any kind of object into them.
Protect the mains cable from sharp edges,
mechanical loads and hot surfaces.
Do not install with sharp fasteners or nails.
Always unplug the power pack from the socket
before installation, dismantling or cleaning.
Never touch the light chain plug or the light
chain itself with wet hands.
The light chain must not be electrically con-
nected to another ligth chains.
If the light chain is not in use for any length of
time (e.g. holidays), disconnect them from the
power supply.
If you have any questions about the product
or are unsure about any of its aspects, please
seek the advice of an electrical equipment
specialist.
Only use the string lights with the supplied
power pack for the type Model No.:
JT-DC30V3.6W-H-IP44; all warranty claims
will otherwise expire.
The light chain is protected against splashes
of water (IP44) as long as the socket meets
the minimum protection standard.
Mounting the lampions
Lay down the lanterns with the eyelets
6
(big-
ger openings) facing upwards.
Insert the cordless end of the lantern stretcher
9
into the lampion’s upper and lower open-
ing. While doing so place the the lantern
stretcher’s two arms
8
centrally onto the rim
of the lower opening.
Hold on to the lantern stretcher. Pull the
eyelets
6
upwards and hang them onto the
hangers
7
.
Use
Insert the plug on end of the light set
1
into
the socket of the mains adapter
2
.
Turn the connecting cap
4
of the mains lead
clockwise to fix the connection.
Insert the mains adapter
2
into the mains
socket. The light set is switched on.
Please note that the power adapter continues
to draw a small amount of power even if the
lamp is turned off as long as the power adapter
is plugged into a power outlet. To switch the
device off completely, unplug the power
adapter from the socket.
Timer function
The On / Off switch
10
has three functions:
Press once
The light chain lights glow permanently for
6 hours and will be followed by a subsequent
pause of 18 hours. Afterwards, the light chain