The MEMO function allows you to record a sequence of functions (button) and combine it with a single call button.
Sometimes it is necessary to perform different operations in succession in order to obtain a certain result.
With MEMO function will be possible to automate a number of functions (also on different devices) without having to
remember and repeat every time you need.
• The MEMO function records the pressure of a maximum of
31
buttons, including the device selection buttons, (except the
[
LEARN
]
button) also memorizing the pressure time and issue of the buttons.
• Any button (except the device selection buttons and the
[
LEARN
]
button) can be used to record a MEMO function;
obviously the preset function on the button will be lost, but it can be recalled by setting again the activation code.
• To recall a MEMO function, press the button to which was matched, the remote control will play the entire sequence
memorized ignoring any other command until its end.
• You can not create recursive or nested MEMO (MEMO functions that call other MEMO)
• More MEMO functions (up to maximum total of
63
) can be recorded in the various remote control use modes
• The recording of MEMO function can be repeated many times, moreover the sequences captured are kept in memory even
with dead batteries or removed.
●
MEMO RECORDING
• Simultaneously press on the MELICONI remote control the
[
OK
]
button and one of the selection buttons corresponding to
the device you wish to operate
(example:
[
TV
]
)
; release, the indicator light flashes.
• Enter the number
999
and press for a moment the button to which to combine the MEMO function.
• At this point the remote control is ready to record the desired button sequence; press in order the buttons to memorize with
the normal rhythm used to command the relative devices.
• To terminate the record procedure, press and hold for at least 6 seconds the selection button
(example:
[
TV
]
)
.
• Wait three flashes indicate that storage; release. (the used button loses the original function that will be called by setting
again the activation code)
From now when the designated button is pressed, the MELICONI remote control will automatically reproduce the sequence
of buttons memorised.
Each MEMO function used reduces the number of available LEARN functions.
Reached the number of records available, the dedicated memory becomes full, preventing further use.
To free memory use one of the following procedures in relation to the data that you want to delete:
• DELETE FUNCTION BY SINGLE BUTTON
• ENTERING THE CODE DIRECTLY
• RESET THE REMOTE CONTROL
If you want to delete the function in combination with a single button, operate as follows:
• Simultaneously press on the MELICONI remote control the
[
OK
]
button and one of the selection buttons corresponding to
the device you wish to operate
(example:
[
TV
]
)
; release, the indicator light flashes.
• Enter the number
888
and keep pressed for at least 6 seconds the button of which you want to delete the function.
• Three final flashes indicate that the operation has been completed successfully.
The original function can be restored by setting the activation code again.
If necessary it is possible to
completely
reset the remote control and bring it back to the initial conditions.
WARNING!
All user settings will be lost. Operate as follows:
• Press and hold on the MELICONI remote control for at least 6 seconds one of the selection buttons corresponding to the
device you wish to control.
(example:
[
TV
]
)
• When the indicator light flashes, release and immediately enter the code
7001
.
• Three final flashes indicate that the operation has been completed successfully.
RESET THE REMOTE CONTROL
DELETE FUNCTION BY SINGLE BUTTON
MEMO FUNCTION
