EVB90640/1
User manual
Rev. 2
Page 1 of 7
1. Installation
Before connecting the EVB to the PC, first install the EVB software. The EVB software can be downloaded from
the Melexis website:
https://www.melexis.com/en/product/EVB90640/Evaluation-Board-MLX90640
Insert the sensor in the ZIF socket on the PCB. Take care to align the notch with the silk screen on the PCB.
Next, connect the PCB with the USB port of the computer. The computer should indicate that a new USB device
is being installed and indicate after a while it has been installed successfully. This installation normally happens
only once. The pwr LED on the PCB should be on.
